The three UK Pillar Two charges
UK Pillar Two legislation, enacted in Finance (No. 2) Act 2023 and effective from accounting periods beginning on or after 31 December 2023, introduced three distinct taxes:
- Multinational Top-up Tax (MTT): the UK IIR. Applied by UK-based ultimate parent entities and intermediate parent entities on the undertaxed profits of their constituent entities worldwide where those profits are taxed below 15%. Operates alongside the standard GILTI framework for US-parented groups that apply the Side-by-Side Safe Harbour.
- Domestic Top-up Tax (DTT): the UK QDMTT. Levied on UK constituent entities of in-scope groups where the group's UK ETR is below 15%. The DTT is a qualified domestic minimum top-up tax under the OECD Pillar Two framework, meaning it is credited against any IIR that would otherwise be collected by another jurisdiction. For UK-headquartered groups, the DTT is typically the primary UK charge.
- Undertaxed Profits Tax (UPT): the UK UTPR. Applied from fiscal years beginning on or after 31 December 2024 (one year after the MTT and DTT). Operates as a backstop where the IIR has not collected the full top-up tax arising from a low-taxed jurisdiction in which the group operates.
For FY2025 (calendar year groups: 1 January to 31 December 2025), all three charges are in force. The practical question is which of the three generates a liability for a given group and what must be reported.
Who is in scope
The UK Pillar Two regime applies to MNE groups with annual consolidated revenue of €750m or more in at least two of the four fiscal years immediately preceding the period in question. The €750m threshold mirrors the global GloBE threshold and uses the group's consolidated financial statements as the starting point.
Domestic groups (all entities located in the UK) are not in scope for the MTT or UPT but are in scope for the DTT where the group meets the revenue threshold and the UK ETR falls below 15%. In practice, with UK corporation tax at 25%, most UK-headquartered domestic groups pass the DTT ETR test comfortably and will not owe any charge.
Excluded entities (investment funds, governmental entities, pension funds, certain holding structures) follow the standard GloBE exclusion rules as enacted in UK legislation.
Key filing deadlines for FY2025 (December year-end)
| Obligation | Charge | Deadline (FY2025) | Notes |
|---|---|---|---|
| Self Assessment return (MTT/DTT/UPT) | MTT, DTT, UPT | 31 December 2026 | 12 months after end of accounting period |
| Payment on account | MTT, DTT, UPT | 30 September 2026 | 9 months after end of accounting period |
| GloBE Information Return (GIR) | All | 31 March 2027 | 15 months after end of period (FY2025); FY2024 had an 18-month extension (deadline 30 June 2026) |
| Notifications (UK filing agent designation) | All | 30 June 2026 | 6 months after end of accounting period |
The notification obligation requires each UK constituent entity to notify HMRC of the group member responsible for filing the GIR and paying the charge in the UK. Where the ultimate parent entity or a designated filing member is filing centrally (the typical arrangement for UK-headquartered groups), each UK entity that is a constituent entity must still submit its own notification unless HMRC has confirmed a single-entity notification arrangement.
The 30 June 2026 notification deadline for FY2025 has already passed for December year-end groups. Groups that missed this deadline should take advice on HMRC's approach to late notifications, which HMRC has indicated it will treat pragmatically in the first filing cycles.
The payment on account: a cash flow consideration
The payment on account falls 9 months after period end (30 September 2026 for December year-end groups), well before the SA return deadline (31 December 2026). Groups must estimate their MTT, DTT and UPT liabilities by the payment on account date even if the full GloBE computation is not yet complete.
For groups using safe harbour elections, the payment on account is straightforwardly nil for safe-harboured jurisdictions. The challenge arises for groups with jurisdictions requiring full computation where the ETR is uncertain at the payment on account date. HMRC's guidance confirms that reasonable estimates are acceptable for the payment on account, but material under-payments may attract interest from the payment on account date rather than the SA return date.
The UK ETR and the DTT: why most groups pass
The DTT is computed at the UK jurisdiction level, applying the GloBE ETR formula to the aggregate GloBE income and covered taxes of all UK constituent entities. With UK corporation tax at 25%, the UK ETR for most groups substantially exceeds the 15% DTT threshold. Groups are unlikely to face a DTT liability unless:
- They hold significant loss-making UK entities with deferred tax assets that reduce covered taxes in the period
- They have UK entities with material income that is exempt or not subject to UK CT (certain tonnage tax regimes, specific financial services exemptions)
- They have intercompany financing arrangements that strip UK taxable income significantly below book profit
Even in these cases, the DTT liability is typically small relative to the group's overall GloBE position. The DTT's primary purpose for UK-headquartered groups is to ensure the UK collects any residual top-up tax before overseas IIR jurisdictions can do so, acting as a shield against foreign IIR charges rather than generating a net new cash cost.
GIR: the 18-month rule and the FY2025 deadline
For the first year a group is in scope (FY2024 for most December year-end groups), the GIR deadline is 18 months after the end of the period: 30 June 2026. For FY2025 and subsequent years, the deadline shortens to 15 months after the period end: 31 March 2027. HMRC has confirmed it will accept GIRs filed by the global deadline set by the jurisdiction where the GIR is filed centrally (the ultimate parent entity's jurisdiction), so UK-headquartered groups filing the GIR in the UK should use 31 March 2027 for FY2025. Groups parented outside the UK should use their parent jurisdiction's deadline and ensure the UK constituent entity's data is included in the central return.
See our article on the revised GIR schema for the template version requirements that apply to FY2025 periods.
UK-specific GIR considerations
For UK-headquartered groups filing the GIR in the UK, several fields require UK-specific treatment:
- DTT as a QDMTT. The UK DTT is a qualified domestic minimum top-up tax. The GIR must record the DTT liability, if any, in the QDMTT section and confirm that it was computed under a qualified domestic law.
- MTT as an IIR. UK-parented groups applying the MTT to overseas constituent entities must record each jurisdiction's MTT calculation in the IIR section of the GIR. The MTT computation mirrors the GloBE IIR formula with UK-specific adjustments for the first filing years.
- UPT exposure. UK constituent entities of foreign-parented groups may be allocated a UPT charge through the global UTPR allocation formula. The GIR must record the allocation. See our article on UTPR in 2026 for the allocation mechanics.
- Transitional CbCR safe harbour elections. For jurisdictions where the group applied the CbCR safe harbour for FY2025 (the last year in which it is available for December year-end groups), the election must be recorded in the GIR's simplification section.
What to prepare now for the remaining FY2025 deadlines
- Confirm the SA return position. The 31 December 2026 deadline for the SA return is 7 weeks away. Groups that have not yet completed their MTT/DTT/UPT computation should prioritise the full GloBE ETR calculation or confirm safe harbour elections for all jurisdictions before this date.
- Review the payment on account made in September. Compare the September 2026 payment on account against the emerging SA return liability. If the payment was materially short, consider a voluntary top-up payment to reduce interest exposure. If it was overstated, the excess will be credited against the SA return or refunded.
- Start GIR data collection for FY2025. With the GIR deadline in March 2027, the data collection window is narrowing. The revised GIR template applies to FY2025 periods for most December year-end groups. See the revised schema article for the new fields required.
- Check constituent entity notifications are complete. If any UK constituent entity has not yet notified HMRC (the June 2026 deadline has passed), take advice on remediation before the SA return is filed.
For a complete data-quality checklist covering SBIE inputs, GIR data preparation and safe harbour test documentation, see the post-filing season checklist.
Pillar2OS produces the UK MTT, DTT and UPT computations as part of the global GloBE ETR model, with HMRC-aligned output formatting for the SA return and GIR filing. See the Compliance Centre.
For FY2026 planning: Finance Bill 2026-27 (introduced 4 November 2026, effective from 1 January 2026) introduces the OECD Side-by-Side Safe Harbour into UK law for the MTT and UPT only. Groups with US ultimate parents may be able to claim the safe harbour from FY2026. See the UK Budget 2026 Pillar Two update for full details of the Finance Bill changes.